Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
PLATING SYSTEM
The 5MS® Lateral Neck Plate
6 & 8-Hole and Scalloped
The specially designed LATERAL NECK PLATE is anatomically curved and scalloped to fit the metatarsal midshaft and distal metatarsal tuberosity.
Design Attributes
- 2.4/2.7mm Locking and Non-Locking Screws
- 2.4/2.7mm non-locking for the Sliding slot
- Most distal screw aimed parallel to joint
- Available in 6 & 8-Hole lengths
Plate Placement: Use the supplied Plate Trials for sizing. The distal aspect of the Plate should be placed just proximal to the metatarsophalangeal joint, with the trajectory of the most distal Screw approximately parallel to the joint space.
NOTE: Locking screw placement of the two most distal holes allows for a maximum length of 15mm for 2.4 screws and 14mm for 2.7 screws without screw interference.
MINIMALLY INVASIVE
CoLink® Bone Graft Harvester
Delivered in sterile, single-use kit for rapid harvest
Morselizes bone into chips to facilitate void filling
Available for use with Tribio™ Backfill Plug
to fill corresponding voids
UNIQUE BONE VOID FILLER
Tribio™ Backfill Plugs
Delivered sterile and ready-to-use
Osteoconductive scaffold rapidly absorbs the surrounding blood and fluids to aid in new bone formation
Tribio™ Backfill Plugs are a proprietary material delivered sterile and ready for use in any bony voids or gaps of the skeletal system. Consisting of hydroxyapatite, tri-calcium phosphate and bioactive glass in a collagen matrix, the Backfill Plugs are sized to easily fit in surgically created osseous defects; 5.5mm dia. (for 6mm void) and 7.5mm dia. (for 8mm void) by 40mm in length. The osteoconductive scaffold rapidly absorbs the surrounding blood and fluids to aid in new bone formation during the healing process.
AlloAid® DBM
Demineralized Moldable Bone Putty
AlloAid Crunch, DBM Putty
- Available in flowable, formable putty and crunch in syringe
- Donor recovery and screening performed according to AATB and FDA guidelines
- Crunch consists of DBM putty & cortical cancellous bone chips
100% Cancellous Bone Sponge Cubes
- Moldable, sterile, demineralized/compressive bone matrix
- Cut and molded as needed, sponge-like fit and fill capabilities
- Natural porous scaffold for encourages osteoconductivity and promotes vascularization and stimulates new bone growth
- Add bone marrow aspirate or platelet rich plasma to create a composite graft
Representation of SAL (Sterility Assurance Level). Designates the occurrence a living microorganism surviving the sterilization process. SAL of 10-6 designates the possibility of finding an unsterile product will be 1 in a million. While other sterilization methods have also been shown to inactivate viruses, they can be detrimental to the biological and physical properties of allograft bone.
BioV® BP
Bioactive Glass with DBM Putty
A Synergistic Combination of Bioactive Glass & Demineralized Bone Matrix
BioV® Bioactive Matrix is a novel bone graft substitute expressly designed to optimize surgical handling, graft stability and osteoproductivity.
Sterility
KNOW YOUR PRODUCT SAL. The AlloAid® DBM is terminally sterilized using a validated gamma irradiation process at an SAL (Sterility Assurance Level) of 10-6. This representation of SAL illustrates the occurrence of a living microorganism surviving the sterilization process. SAL 10-6 designates the probability of finding an unsterile product to be 1 in 1 million. Competitive tissue products may be sterilized to an SAL of 10-3. This increases the odds of finding an unsterile product to 1 in 1 thousand.
Directory of Forefoot Indications
- Hammertoe PIP Fusion
- DIPJ Fusion
- Weil Osteotomy
- Lesser MTP Arthroplasty
- Nerve Decompression
- Metatarsal Fractures