PLATING SYSTEM
The 5MS® Plantar Plates
The 5MS® Fracture System’s anatomically contoured Plantar Plate is a new solution for proximal 5th metatarsal fractures. In contrast to traditional fixation with intramedullary screws, fixation with a plantar-lateral tension side plate is designed for improved resistance to torsion and plantar gapping for highly active patients, including athletes. Applying a compression plate to the tension side of the 5th metatarsal fracture can help facilitate fracture union, improve healing and reduce risk of refracture.
Design Attributes
- Regular (2.4/2.7mm) and Large* (3.0mm) Locking and Non-Locking Screws
- Distal Compression Slot, Non-Locking
- Bullet tips at both ends – smaller incision
- Anatomically pre contoured
- Available in 4-Hole and 5-Hole versions
*Special Order: Large Plates and 3.0mm CoLink® Plate Screws
5MS® Reduction Forceps
These unique 5MS® Reduction Forceps are specifically designed to maintain alignment and compression of displaced 5th metatarsal fractures during provisional fixation. The barbed and straight ends offer increased utility over standard forceps. The barbed end is designed to provide midshaft purchase while the curved end spikes into the proximal tuberosity.
The 5MS® Jones Fracture Screws
4.5mm, 5.5mm and 6.0mm Diameter
The revolutionary 5MS® Jones Fracture Screw design combines the rotational stability of a headless screw with the compression levels and ease of use of a conventional-headed lag screw. Jones Fracture Screws feature a reduced cannulation size for increased Screw strength, while facilitating optimal Screw placement and use of a larger Guide Wire for reduction. The system utilizes a set of reusable instruments that are color coded for increased operating room efficiency.
Design Attributes
- Increased rotational stability
- Dual lead distal threads
- Countersinkable heads
- Reduced cannulation 1.6mm
- 2.2mm Guide Wire used for reduction
- Available in 4.5, 5.5 and 6.0mm diameter sizes & 40-70mm lengths
I.B.S. Compression Screws
4.5 and 6.5mm Diameter
INDIVIDUALLY PACKAGED – Compression Screws are delivered in STERILE, cylindrical cases enclosing a series of capped sleeves. Each Screw package includes a series of self-adhesive labels for UDI compliance and comprehensive implant TRACEABILITY for hospital and patient records.
Each sterile screw package has 6 self-adhesive labels per Implant and is easily identifiable by style, diameter and length on the color-coded end cap.
INDIVIDUALLY PACKAGED – Compression Screws are delivered in STERILE, cylindrical cases enclosing a series of capped sleeves. Each Screw package includes a series of self-adhesive labels for UDI compliance and comprehensive implant TRACEABILITY for hospital and patient records.
Each sterile screw package has 6 self-adhesive labels per Implant and is easily identifiable by style, diameter and length on the color-coded end cap.
MINIMALLY INVASIVE
CoLink® Bone Graft Harvester
Delivered in sterile, single-use kit for rapid harvest
Morselizes bone into chips to facilitate void filling
Available for use with Tribio® Backfill Plug
to fill corresponding voids
UNIQUE BONE VOID FILLER
Tribio® Backfill Plugs
Delivered sterile and ready-to-use
Osteoconductive scaffold rapidly absorbs the surrounding blood and fluids to aid in new bone formation
Tribio® Backfill Plugs are a proprietary material delivered sterile and ready for use in any bony voids or gaps of the skeletal system. Consisting of hydroxyapatite, tri-calcium phosphate and bioactive glass in a collagen matrix, the Backfill Plugs are sized to easily fit in surgically created osseous defects; 5.5mm dia. (for 6mm void) and 7.5mm dia. (for 8mm void) by 40mm in length. The osteoconductive scaffold rapidly absorbs the surrounding blood and fluids to aid in new bone formation during the healing process.
AlloAid® DBM
Demineralized Moldable Bone Putty
AlloAid Crunch, DBM Putty
- Available in flowable, formable putty and crunch in syringe
- Donor recovery and screening performed according to AATB and FDA guidelines
- Crunch consists of DBM putty & cortical cancellous bone chips
100% Cancellous Bone Sponge Cubes
- Moldable, sterile, demineralized/compressive bone matrix
- Cut and molded as needed, sponge-like fit and fill capabilities
- Natural porous scaffold for encourages osteoconductivity and promotes vascularization and stimulates new bone growth
- Add bone marrow aspirate or platelet rich plasma to create a composite graft
Representation of SAL (Sterility Assurance Level). Designates the occurrence a living microorganism surviving the sterilization process. SAL of 10-6 designates the possibility of finding an unsterile product will be 1 in a million. While other sterilization methods have also been shown to inactivate viruses, they can be detrimental to the biological and physical properties of allograft bone.
BioV® BP
Bioactive Glass with DBM Putty
A Synergistic Combination of Bioactive Glass & Demineralized Bone Matrix
BioV® Bioactive Matrix is a novel bone graft substitute expressly designed to optimize surgical handling, graft stability and osteoproductivity.
Sterility
KNOW YOUR PRODUCT SAL. The AlloAid® DBM is terminally sterilized using a validated gamma irradiation process at an SAL (Sterility Assurance Level) of 10-6. This representation of SAL illustrates the occurrence of a living microorganism surviving the sterilization process. SAL 10-6 designates the probability of finding an unsterile product to be 1 in a million. Competitive tissue products may be sterilized to an SAL of 10-3. This increases the odds of finding an unsterile product to 1 in 1000.
Directory of Forefoot Procedures
