Engineered sterile allograft with multiple wedge facets designed to anchor the BioNail in the bone to fix bone segments together.
The AlloAid BioNail™ is a resorbable, sterile allograft with osteoconductive properties. Engineered with multiple wedge facets designed to anchor the BioNail in the bone. AlloAid BioNails™ can be used for fixation and augmentation of small bone osteotomies of the foot.
Sterile allograft. 10-6 SAL
Engineered 100% Allograft
2 Diameters & 3 Lengths
Sterile Single use Instrument Kit:
2.4 & 2.9mm Calibrated Reamers, Reamer Guide, Tamp and K-wire
New Fixation for Chevron/Austin Osteotomies
1. Prep site for Allograft
Following the appropriate osteotomy, select the Reamer Guide and corresponding Reamer (see Reamer Size in table above). A K-wire can be used to stabilize the osteotomy while drilling.
2. Ream to Desired Depth
Use laser-etched depth marks on the supplied Reamers within the Drill Guide to achieve the desired depth.
3. Allograft Placement
Select the corresponding AlloAid BioNail™ and carefully place the allograft into the reamed hole being certain to not to bend or apply excessive force.
4. Fully seat Allograft
Use the tamp to seat the BioNail to the desired depth. Flush placement should be achieved with the proximal surface. Hand pressure on the tamp may be augmented by use of a mallet to gently achieve flush placement of the allograft. The end of the BioNail can be trimmed to achieve a flush surface.
Additional BioNails may be used for stability per surgeon preference.