ACTIVE BUNION PROCEDURE

CoLink Vallux^®

Joint-Sparing MIS Solution for Triplanar Hallux Valgus Correction
Implant Guided Translational Osteotomy
Zero Prominence Plating System

For Patient Information

CoLink Vallux^® Active Bunion Procedure

CoLink Vallux^® Plate
P90 ST031 – CoLink Vallux Plate

STERILE DISPOSABLE INSTRUMENT KIT
P06 S0001 – Contains 1.6mm and 1.9mm Drills, 1.6mm K-wires and 1.1mm Olive Wires

P04 S0051 – T8 Driver, Solid, AO, Sterile

NON-STERILE DISPOSABLE INSTRUMENTS

P09 N0051 – CoLink Vallux Olive Wire – .045, Long, Non-Sterile

Note: A saw blade is not provided in the system. Use of a long and narrow blade with a minimum length of 25mm is recommended.

Screw Options

CoLink VAL™ – Variable Angle Locking Screws

CoLink Vallux Plates feature variable angle locking technology with polyaxial screw placement and 30° of locking variability for improved angular stability.

Reusable Instrument Set

CAUTION: Federal law (USA) restricts this device to sale and use by, or on the order of, a physician.

All content contained herein is furnished for informational purposes only. In2Bones does not recommend a particular surgical product or procedure suitable for all patients. Each surgeon must evaluate the appropriateness of a device and corresponding techniques based on medical training, clinical judgment and surgical experience. The proper surgical technique and/or procedure are the responsibility of the medical professional. Indications, contraindications, warnings and precautions are listed in the implant package insert and should be reviewed carefully by the physician and operating room personnel prior to any proposed procedure. Availability of these products might vary from one given country or region to another as a result of specific local regulatory approval or clearance requirements for sale in such country or region.

Type and press Enter to search