The IBS Compression Screws
Available in 2.0, 2.5, 3.0*, 3.5*, 4.5*, 6.5* and 8.0mm, the screws compose a comprehensive offering of screw fixation for Foot and Ankle surgery.
NeoSys® Single-Use Instruments
In2Bones’ NeoSys Single-Use instruments are specially designed for precision and to resist torsional stress, as well as to ensure efficiency and convenience during surgery. Each instrument has been manufactured from recyclable polymer. Implant connection tips are grade 1 stainless steel.
Drivers are cannulated with an open window to allow K-wire removal. Corresponding Screw diameters are imprinted on each Driver shaft. Driver can be used either with the handle or with a power drill equipped with an AO attachment.
Implant Measurer and Depth Gauge attachment are provided.
Single-Use Instrument Preparation
Select the corresponding instruments, Screwdriver Handle and Driver, from the NeoSys® Single-Use Instrument Set. Place nonessential instruments aside and recycle after surgery per standard hospital procedures.
Attach Implant Driver into the Handle.
Align corresponding Driver Head [see chart for Screw size / Screw tip] with Driver Handle using T shape to verify proper positioning. Securely snap Driver
shaft into locked position [double snap]. Driver shaft is released by compressing tab on rear of Handle.
Measurer
Implant can be measured either on K-wire or with the Depth Gauge. To use as Depth Gauge, insert orange depth finder into appropriate side of holder. Read depth at leading edge.
Measurer can also be used to measure depth of K-wire. Slide Measurer over K-wire. Read depth on corresponding scale.
IBS Compression and Fully Threaded* Screws are available in
2.0, 2.5, 3.0*, 3.5*, 4.5*, 6.5*, and 8.0mm.
The screws compose a comprehensive offering of screw fixation for Foot and Ankle surgery.
2.0mm
10-30mm, Torx 7
Drill dia. 1.6mm
Multiple increments
2.5mm
12-28mm, Torx 7
Drill dia. 1.6mm
2mm increments
3.0mm
12-34mm, Torx 8
Drill dia. 2.2mm
2mm increments
3.5mm
18-40mm, Torx 8
Drill dia. 2.2mm
2mm increments
4.5mm
20-70mm, Torx 15
Drill dia. 3.0mm
Multiple increments
6.5mm
20-115mm, Torx 25
Drill dia. 4.3mm
5mm increments
8.0mm